The 3 Solutions That You Can Take And Use For Removing
"UGLY RUST" On Your Project!
Today we're going to help you understand more on the following 3 rust removal areas:
 |
Rust Removal by Sanding And Grinding |
|
Rust Removal by Panel Replacement - Cutting & Replacing |
|
Installing Rust Repair Panels - Sheet Metal Tactics |
Although there have been major advances in undercoats and corrosive resistant materials and gadgets, rust is still a major problem on automobiles ESPECIALLY if your car is in a location that promotes it. Places like salty areas, by the ocean, salt used to help driving in snow etc...
Why is rust still such a large concern for motorists?
The extensive use of salt and sand on the roads to make icy winter driving safe has a powerful effect on steel car bodies. The salts are such a catalyst to rust that actual rust through of body panels can happen in as little as a few years.
Water is also a catalyst for rust and in areas of countries that are arid, steel car bodies can last virtually forever.
Auto rust repair may at times therefore be more necessary than collision repair, depending upon your geographical location and/or where you have kept your vehicle.
What to do if you notice any rust on your vehicle.
If you spot rust, you will need to detect whether it is only found on the surface or if it is corrosion that penetrates through the entire panel. Surface rust, with solid metal found beneath it, can be easily removed with sanding followed by the application of epoxy primer.
What is Epoxy Primer?
Epoxy primer is used for waterproofing and to protect bare metal from the process of oxidation. You should need to apply one/two coats.
You will need to use these kinds of primers on bare metal before you would apply anything else.
Two important characteristics of epoxy primer are:
 |
Protects and adheres very well to bare metal. |
|
Provides a perfect base product for undercoats and paint. |
If the rust problem is more advanced and has heavily pitted the sheet metal, it will be necessary for you to perform more extensive rust repairs before applying paint.
Rust repair of this nature can be done by media sand blasting or by using a grindr followed by applying epoxy primer. You will then need to follow up with an application of high-build primer.
Even more severe rust problems for example when the rust has penetrated through the sheet metal, will require restoration with the use of rust repair panels welded onto existing bodywork. This is very common with classic cars in certain geographical locations.
I have done MANY specialty sheet metal jobs on cars. Custom making patches that would be welded into place using a spot welder. We have Full Length Videos of this and more in the VIP course.
Auto Rust Repair Solution 1 - Rust Removal by Sanding
Surface rust removal from solid sheet metal can be achieved by using a sanding block and 80- to 100-grit sandpaper and sometimes finer grits can be successfully used depending the severity of the rust.
Once all the rust is gone and you're down to either bare metal, wipe the panel down using wax and grease remover. Next coat the panel with epoxy primer. The sand scratches left behind from using the coarse grit sandpaper will provide excellent adhesion for the epoxy primer.
Always remember to take care of any dents by repairing or filling them and then applying a coat of high build primer before you block sand.
Auto Rust Repair Solution 2 - Rust Removal by Panel Replacement
For panels that are damaged beyond repair due to widespread rust, rust removal won't be necessary. You are better off replacing the panels with new ones. If you are replacing a complete panel such as a door for example, the process is the same for rust repair as it is for collision repair.
It really doesn't matter if you decide to use genuine new factory replacement panels, cheaper after-market units or used parts; what is important is that you search for the best products that will fit your price range.
The surface preparation process may be slightly different, compared with the rest of the vehicle, when you use new replacement panels. Make sure you clean such panels using wax and grease remover before you do anything else.
You will have to scuff the surface using a 400-600 grit paper otherwise the primer and paint won't adhere properly to it.
It's important to remember that any application of primer undercoats should be completed before you install the panel back onto the vehicle.
In addition, only apply the top coats once the panel has been
correctly installed and aligned making it easier
for you to accomplish proper paint blending.
It is a great idea to use the same brand of products when doing paint repait to your project. If you buy all materials from one paint shop mostlikely they will work well together.
If you have any product question, just ask the paint rep. That's what they are there for!
Auto Rust Repair Solution 3 - Installing Rust Repair Panels
Rust repair panels are generally used in the restoration of vintage vehicles; however they are becoming more commonly used on later model vehicles as the average vehicle age increases.
Rust repair panels are the best rust repair method for areas such as the lower parts of a door or a portion of the main body including the rear quarter panel that is beyond all other means of repair.
For those of you working on a mainstream vehicle, it is very likely a rust repair panel for your particular application will be available.
When installing rust repair panels, you must first determine how much of the original panel to remove in order to weld the new panel into place. You should be able to remove all of the damaged or rusted area, but not so much that the panel doesn't cover the entire area.
Don't worry if the available rust repair panel is not large enough to cover the entire area that needs to be repaired, it may still be useful for repairing the elaborate body lines of the damaged area.
Follow this 8-Step System to Effectively Install Rust Repair Panels
Step 1. First fit the panel in place, then scribe or mark a line on the original panel. The original panel below this line will be removed.
Step 2. Since the rust repair panel will be welded into place, the existing paint (and any body filler) needs to be ground away with a grinder. Approximately 2 inches of bare metal should surround the area to be welded.
Step 3. Before cutting the original metal away, double check the fit of the rust repair panel and then scribe the line along where the cut will be made. It pays to double check the fit of the rust repair panel before cutting anything.
This is so you don't have to weld in an additional panel between the original metal and the rust repair panel you are installing. It is much easier to make a second cut than to add more material.
Step 4. A range of tools such as a plasma cutter, die grinder, reciprocating saw or tin snips can be used to cut out the damaged section. Accurately fitting the panel, marking the cut accordingly and then accurately cutting out the panel will provide a better rust repair panel installation.
Step 5. Once you've removed the damaged section, set the rust repair panel in its place, check it for proper alignment, followed by clamping it into its precise location and then finally weld.
The type of weld you want to use will depend upon the panel you are replacing, the type of welder you have available and either the operator's or your own skills.
When welding with a MIG welder, start with 1/8 inch tacks and skip around to avoid getting the panel too hot which would cause distortion. Another trick is to use your air hose with an air nozzle to blow cool air onto the welds to prevent them from getting too hot.
Step 6. Once you have finished welding, grind the tacks down flat using a pneumatic or electric grinder. When finished, it will be virtually impossible to tell where the seam is located.
Step 7. Finish by cleaning the repaired area with wax and grease remover, apply your body filler, epoxy primer and finish the bodywork to the surrounding area.
Step 8. Follow up with primer, glaze if needed prime and then block sand as needed before you apply your sealer andor top coats.
That's It!
For more information and to see all of this in easy learning step-by-step videos
that take you by the hand be sure to check out the VIP CLUB HERE!
Talk soon!
Tony
